Diy Easy Paper Roses Easy Deco Mesh Projects

I created a bunch of deco mesh flowers for the back wall of my studio. I've actually never used deco mesh before, haven't even made a deco mesh wreath, which seem to be all the rage these days. But I had seen some deco mesh flowers this past January that I just couldn't get out of my mind.

How to Make Deco Mesh Flowers

Decorative mesh is similar in nature to window screen, only it's not sharp and won't cut you. It comes in a variety of colors, but other than wreaths and using it as fill for a flower arrangement, I hadn't heard of any other deco mesh ideas.

NOTE: If you prefer to buy some pretty deco mesh flowers, be sure to check out the vast selection on Etsy!

A quick search on Google or Pinterest will yield an array of deco mesh wreath ideas, but that's not what I was looking for. No, I wanted flowers, like these…

I took this photo In January of this year at the Craft & Hobby Association (CHA) trade show. This gorgeous display was put together by the creative folks at FloraCraft, the makers of all things Styrofoam. In fact, I visited their offices a few months ago in Michigan. When I came back home I emailed the marketing director and told her that I really wanted to create some similar deco mesh flowers.

She was not only kind enough to type up some quick directions for me, she also sent me a great big box of decorative mesh to create with! I'm going to show you how I made a few of these flowers, but it's important to note that there are some pretty basic instructions then you just create and adapt from there! So these are really fun to just wing it with.

I hung all the flowers with Command Strips. In fact everything (EVERY. THING.) in my studio is hung by Command Strips. When I rented this space the landlord was concerned about nail holes, so I just eliminated that worry.

In addition to the deco mesh flowers hanging above my photo equipment, I wanted to make some dandelions to go with my dandelion painting.

Down below I'll explain what I did and there's even a video showing how to make these deco mesh tube flowers! You can even use this method to create a deco mesh Pumpkin Wreath pictured above!

After hanging all the big flowers there was one spot that felt like it needed something. So I created a big white and yellow daisy for that spot.

This particular flower hangs next to my fourth window and uses several different techniques in one. I'll show you how I made that deco mesh flower below as well.

In addition to all of these flowers, I also made a bright yellow one for my friend Amanda of Aunt Peaches. She hung it on her door, I love the way it looks there! Amanda makes the most gorgeous paper flowers you have ever seen, so make sure you check those out!

And finally I wanted to share these adorable pictures of my friend and neighbors, Debra and Lori. They stopped by my studio last week and I taught them how to make their own deco mesh flowers to take home with them. So fun!

There are several different kinds of flowers here, so I'' go through each one. The ones I didn't snap pictures of while I made them I'll share links to instructions for wherever I can.

There are affiliate links within this post. That means if you click and buy something I may earn a small commission. Thank you!

Supplies for making deco mesh flowers

• 6-inch (5 7/8) Styrofoam disc
• U-shaped floral pins
• Decorative mesh (I used 10-yard rolls in 10-inch and 21-inch widths)*
• Low-temp glue gun
• Scissors
• Command Strips for hanging

*If you are wondering how many rolls of decorative mesh you will need for each flower, it will vary depending on the type you make and the size. For one large flower you will need a full 10yd x 21in roll.

Daisy or Sunflower

1. Cut mesh into squares, they don't have to be perfect.
2. Lay mesh on table and fold opposite corners into the center.
3. Gather the center with your fingers.
4. Fold the gathered mesh in half and pin the center to the edge of foam disc, adding glue to the pin before inserting.
5. Continue all the way around the disc, placing pins close to each other.
6. When you've gone completely around the disc, use smaller mesh in a different color and repeat these steps, filling in the center of the flower.

Variation: The white flower with the yellow center was made using this exact method. The only difference is that after pinning in the yellow center I decided to tuck and pin in the long ends of the yellow mesh, created a puffed center.

Daisy with Tube center

1. Follow instructions about for the flower petals.
2. Cut squares of 10-inch decorative mesh and roll into a tube.
3. Poke a pin through the center of the tube and fold the tube in half, then push pin into the center of the flower (see dandelion video below if you need a visual).

The video above shows you how to create a tube flower, like my dandelions. NOTE: After making the video and creating the flower I discovered that I could apply the glue, push the pin into the foam then push the head of the pin in (from the center of the tube), which in turn pushed the pin in farther and into the glue. Therefore there was no longer a need to use the "hot glue finger thing" ;) to press into the glue. Hope that made sense.

When I finished the yellow and white tube flowers I hung them on the wall by my desk to go with my dandelion painting. However, I didn't like the way they were just hovering there, so my friend Debra suggested using some yard sticks I had here as stems. Then when trying to figure out what to make the seed heads out of, another friend suggested using a feather boa. Brilliance. So I used glue dots to attach one-inch pieces of feather boa to the wall so they appear to be blowing away.

Large tube flowers

The large blue tube flower is made from 21-inch ombre blue deco mesh. The process is exactly the same as the one in the video, just larger.

The combo flower

1. For this flower I used a few different techniques. I used the tube method for the outside of the flower first.
2. Then I cut a Styrofoam ball in half and pinned orange tubes (10-inch) around the outer edge.
3. I glued and pinned that ball into the middle of the tube flower on the visible piece of the foam disc.
4. I inserted some pink tubes, only instead of folding them in half, I only folded the tube down at the bottom because I wanted them to be longer.
5. Finally I added white deco mesh to the center using the loop method which is described in this video.

Other flowers

You will see some small flowers on the wall. I used the method in this video to make those.

• I also used the loop method for the medium sized yellow, white and green flowers.
• I wrapped halved Styrofoam balls with deco mesh to create a pretty center for some of my flowers like the large green and blue one and the medium white one.

I hope you enjoyed these tutorials and I hope it inspires you to create your own deco mesh flowers. They would be great for a girl's room, a wedding or your craft room. Have fun!

Deco Mesh Flowers

Learn how to make beautiful flowers in different designs using decorative mesh. A full colorful projects for everyone!

• 6- inch 5 7/8 Styrofoam disc
• U-shaped floral pins
• Decorative mesh I used 10-yard rolls in 10-inch and 21-inch widths*
• Low-temp glue gun
• Scissors
• Command Strips for hanging

Daisy or Sunflower

• Cut mesh into squares, they don't have to be perfect.

• Lay mesh on table and fold opposite corners into the center.

• Gather the center with your fingers.

• Fold the gathered mesh in half and pin the center to the edge of foam disc, adding glue to the pin before inserting.

• Continue all the way around the disc, placing pins close to each other.

• When you've gone completely around the disc, use smaller mesh in a different color and repeat these steps, filling in the center of the flower.

• Variation: The white flower with the yellow center was made using this exact method. The only difference is that after pinning in the yellow center I decided to tuck and pin in the long ends of the yellow mesh, created a puffed center.

Daisy with Tube center

• Follow instructions about for the flower petals.

• Cut squares of 10-inch decorative mesh and roll into a tube.

• Poke a pin through the center of the tube and fold the tube in half, then push pin into the center of the flower (see dandelion video below if you need a visual).

• The video above shows you how to create a tube flower, like my dandelions. NOTE: After making the video and creating the flower I discovered that I could apply the glue, push the pin into the foam then push the head of the pin in (from the center of the tube), which in turn pushed the pin in farther and into the glue. Therefore there was no longer a need to use the "hot glue finger thing" ;) to press into the glue. Hope that made sense.

The combo flower

• For this flower I used a few different techniques. I used the tube method for the outside of the flower first.

• Then I cut a Styrofoam ball in half and pinned orange tubes (10-inch) around the outer edge.

• I glued and pinned that ball into the middle of the tube flower on the visible piece of the foam disc.

• I inserted some pink tubes, only instead of folding them in half, I only folded the tube down at the bottom because I wanted them to be longer.

• Finally I added white deco mesh to the center using the loop method which is described in this video.

If you are wondering how many rolls of decorative mesh you will need for each flower, it will vary depending on the type you make and the size. For one large flower you will need a full 10yd x 21in roll.

• Author
• Recent Posts

Amanda Formaro is the crafty, entrepreneurial mother of four children. She loves to bake, cook, make kid's crafts and create decorative items for her home. She is a crafting expert and guru in the kitchen and has appeared online and in print publications many times over the years. She is also the editor for the Home & Garden channel at Craft Gossip and owner of FunFamilyCrafts.com.

bennerrowend.blogspot.com

Source: https://craftsbyamanda.com/deco-mesh-flowers/

Share this post